RoHS Status
Power Fuses and Accessories
UL Low Voltage, Branch Circuit Rated Fuses
UL Low Voltage Supplementary Fuses
Electronic - PC Board and Small Dimension Fuses
Medium Voltage Fuses and Fuse Links
High Speed Fuses
IEC & British Standard Fuses
Fuse Holders and Blocks
Power Distribution Blocks
Wire Connection Products
Disconnects
Telecom Protection Devices
Surge Suppression Devices
Electronic Components
Printed Circuit Board Level Fuses
Coiltronics® Magnetic Products
PolySURG™ Overvoltage Protection Devices
PowerStor® Supercapacitors
Magnum Terminal and Power Distribution Blocks and Interconnect Devices
Terminal Blocks
Euro-Mag Series
Rail Mount Blocks
Terminal Blocks
Wire Management Products
Edge Connectors
Power Fuses and Accessories
Low Voltage Branch Circuit Fuses
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for many of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; "Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
UL Power Fuses: Class CC
Catalog Symbols:
FNQ-R-, LP-CC-, KTK-R-
RoHS Status:
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL Power Fuses: Class G
Catalog Symbols:
SC-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL Power Fuses: Class J
Catalog Symbols:
DFJ-, JKS-, LPJ_SP, TCF-/TCFH-*
*CUBEFuse® has Class J performance
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
Alternate RoHS Compliant Product: Class J CUBEFuse®
UL Power Fuses: Class K5 and H
Catalog Symbols:
NON-, NOS-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL Power Fuses: Class L
Catalog Symbols:
KLU-, KRP-C_SP, KRP-CL-, KTU-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL Power Fuses: Class RK-1
Catalog Symbols:
KTN-R-, KTS-R-, LPN-RK_SP, LPS-RK_SP
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL Power Fuses: Class RK5
Catalog Symbols:
DLN-R-, DLS-R-, FRN-R-, FRS-R-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL Power Fuses: Class T
Catalog Symbols:
JJN-, JJS-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
Plug Fuse
Catalog Symbols:
S-, SL-, T-, TL-, W-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
Back To Top
Low Voltage Supplemental Fuses
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for many of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Cable & Welder Limiters
Catalog Symbols:
64200, 64300, 64400, 64600, 68150, 68200, 68300, 68400, 68600, KCA, KCB, KCC, KCD, KCE, KCY, KCZ, KDA, KDB, KDC, KDY, KEW, KEX, KFH-A, KFT, KFZ, KIG, KPF, KQT, KQV
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL 13/32 X 1 1/2" (Midget) Supplementary Fuses (Fast-Acting and Time-Delay)
Catalog Symbols:
BAF-, BAN-, DCM-, FNM-, FNQ-, KLM-, KTK-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
UL 13/32 X 1 3/8" Supplementary Fuses (Fast-Acting)
Catalog Symbols:
BBS-, KTQ-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
Pin Indication Fuses
Catalog Symbols:
FNA-, GBA-, GLD-, MIC-, MIN-, MIS-, KAZ-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
Circuit Limiters
Catalog Symbols:
ANL-, ANN-
RoHS Status
No plans to convert to RoHS compliant - applications are for transportation products and as such, according to "The opinion of the Commission is that excluded from the scope of the RoHS Directive is the equipment which part of another type of equipment that does not fall with in the scope of this Directive. Therefore, equipment specifically designed for installation in airplanes, boats, and other means of transport is considered to fall outside the scope of the RoHS Directive."
Automotive Blade-Type Fuses
Catalog Symbols:
ATC-, ATM-, MAX-
RoHS Status
Products for automotive/vehicles fall under the End of Life Vehicles (ELV) Directive, and from page five of its frequently asked questions comes: "The opinion of the Commission is that excluded from the scope of the RoHS Directive is the equipment which is part of another type of equipment that does not fall with in the scope of this Directive. Therefore, equipment that is specifically designed to be installed in airplanes, boats, and other means of transport is considered to fall outside the scope of the RoHS Directive."
Automotive Blade-Type Fuse Holders
Catalog Symbols:
HHC, HHD-, HHF, HHG, HHL-, HHM-, HHX
RoHS Status
In-Line Size Rejecting Fuses
Catalog Symbols:
GLQ-, GMQ-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
In-Line Size Rejecting Fuse Holders
Catalog Symbols:
HLQ-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
In-Line Non-Rejecting Fuses
Catalog Symbols:
GLR-, GMF-, GRF-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
In-Line Non-Rejecting Fuse Holders
Catalog Symbols:
HLR-
RoHS Status
The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
Back To Top
Electronic - Printed Circuit Board and Small Dimension Fuses
Because these fuses can be used in consumer electronic and electrical equipment sold into the European Union, Cooper Bussmann has proactively pursued and attained RoHS compliance for the majority of these fuses. The need for compliance is highly dependent on the application of the fuse as many are also used as components in a "large-scale stationary industrial tool" or a "fixed installation." These are deemed to be outside the Directives' scope per the European Commission's "Frequently Asked Questions" paper regarding coverage.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
5 X 15mm fuses
Catalog Symbols:
C515-, C517-, C518-, C519-, C520-
RoHS Status
These fuses are RoHS compliant if there is a "-R" suffix on the catalog number. Most products have third party testing completed.
5 X 20mm IEC Fuses
Catalog Symbols:
GDA- ( S501_-R), GDB- (S500_-R), GDC- (S506_-R)
RoHS Status
These fuse catalog numbers have been superseded with new numbers as indicated in parenthesis above. All new catalog number fuses are RoHS compliant. Most products have third party testing completed.
5 X 20mm UL Fuses
Catalog Symbols:
GMA-, GMC-, GMD-
RoHS Status
These fuses are RoHS compliant if there is a "-R" suffix on the catalog number. Most products have third party testing completed.
1/4" X 5/8" to 1" Fuses
Catalog Symbols:
AGA-, AGW-, AGX-
RoHS Status
These fuses are not RoHS compliant.
1/4" X 1 1/4" Fast-Acting Fuses
Catalog Symbols:
ABC-, AGC-, GBB-
RoHS Status
These fuses are RoHS compliant if there is a "-R" suffix on the catalog number. Most products have third party testing completed.
1/4" X 1 1/4" Time-Delay Fuses
Catalog Symbols:
MDA-, MDL-, MDQ-
RoHS Status
MDL- and MDA- fuses are RoHS compliant if there is a "-R" suffix on the catalog number. MDQ- is not RoHS compliant. Most products have third party testing completed.
PC Board Mount Fuse Holders
Catalog Symbols:
HBH-, HBV-, HBW-, HTC-
RoHS Status
PC Board Fuseclips For 1/4", 9/32", 13/32", 9/16" and 5mm Diameter Fuses
Catalog Symbols:
1A1119-, 1A1120-, 1A1907-, 1A3398-, 1A3399-, 1A3400-, 1A4533-, 1A4534-, 1A5018-, 1A5600-, 1A5601-, 1A5602-, 5591-, 5592-, 5672-, 5674, 5681-, 5682-, 5956-, 5960-, HTC-
RoHS Status
The majority of fuseclips are RoHS Compliant.
Back To Top
Medium Voltage Fuses (up to 38kV)
These products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because:
- The voltages encountered with the application of these products are always exceeding the limits contained in the WEEE Directive Article 3(a); "'Electrical and electronic equipment' or 'EEE' means equipment which is dependent on electric currents to electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields falling under the categories set out in Annex IA and designed for use with a voltage rating not exceeding 1000 Volt alternating current and 1500 Volt for direct current." The majority of applications for these Cooper Bussmann products are NOT within the scope of the RoHS and WEEE Directives
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Boric Acid Fuses
Catalog Symbols:
BBU_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
E-Rated Fuses
Catalog Symbols:
EBI055_, ECL055-, ECL155-, JCD-, JCE-, JCI-, JCQ-, JCT-, JCU-, JCW-, JCX-, JCY-, JCZ-, JDZ-, MV055F_, MV155F_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
R-Rated Fuses
Catalog Symbols:
JCG, JCH, JCK-, JCL-, JCR-
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
British Standard IEC Fuses for Motor Circuits
Catalog Symbols:
_VFNHA_, _VKNHA_, _WDFHO_, _WDLSJ_, _WDOH6_, _WFFHO_, _WFLSJ_, _WFMSJ_, _WFNHO_, _WFOH6_, _WJON6_, _WKFHO_, _WKMSJ_, _WKNHO_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
DIN IEC Fuses for Transformers
Catalog Symbols:
_ADLSJ_, _ADOSJ_, _SDLSJ_, _SDMSJ_, _SDQSJ_, _SFLSJ_, _SFMSJ_, _SFQSJ_, _SKLSJ_, _SKMSJ_, _WDLSJ_, _WDOSJ_, _WFLSJ_, _WFOSJ_, _WKLSJ_, _WKMSJ_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
Potential Transformer Fuses
Catalog Symbols:
_ABCNA_, _ABFNA_, _ABGNA_, _ABWNA_, _AMWNA_, _CAV_, _CAVH_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
Fast-Acting Fuses
Catalog Symbols:
_HVA_, _HVB_, _HVJ_, _HVL_, _HVR_, _HVW_, _HVT_, _HVU_, _HVX_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
BS IEC Fuses For Oil-Filled Switchgear
Catalog Symbols:
_OEFMA_, _OEGMA_, _OHFMA_, _OHGMA_, _OLGMA_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
EEI-NEMA Type H, K, N & T
Catalog Symbols:
FL11H_, FL11K_, FL11T_, FL12K_, FL3K_
RoHS Status
No plans to convert to RoHS compliant - all applications are for fixed installations exceeding 1000Vac//1500Vdc, outside RoHS Directive scope.
Back To Top
High Speed Fuses
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for many of these products. In general, square body high-speed fuses are compliant, as well as most BS 88 style fuses. The North American and Ferrule style high speed use lead to make electrical connections. If RoHS compliance is desired, consider using an equivalent square body or BS 88 high speed fuse having similar performance characteristics.
However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
North American High Speed Fuses
Catalog Symbols:
FWA-, FWH-, FWJ-, FWP-, FWX-, KAC-, KBC-
RoHS Status
North American high speed fuses are generally not compliant with RoHS for its banned substances. For the most part, North American high speed fuses are part of a fixed installation and are outside the scope of RoHS.
Square Body High Speed Fuses
Catalog Symbols:
170M_
RoHS Status
Square body high speed fuses are generally compliant with RoHS for its banned substances. For the most part, square body high speed fuses are part of a fixed installation and are outside the scope of RoHS.
BS 88 High Speed Fuses
Catalog Symbols:
_CT, _ET, _EET, _FE, _FEE, _FM, _FMM, _LCT, _LET, _LMT, _LMMT, _MT, _MMT
RoHS Status
BS 88 high speed fuses are generally compliant with RoHS for its banned substances. For the most part, BS 88 high speed fuses are part of a fixed installation and are outside the scope of RoHS.
Ferrule High Speed Fuses
Catalog Symbols:
FWA-, FWC-, FWH-, FWJ-, FWK-, FWL-, FWP-, FWS-, FWX-
RoHS Status
Ferrule (cylindrical/cartridge) high speed fuses are generally not compliant with RoHS for its banned substances. For the most part, Ferrule high speed fuses are part of a fixed installation and are outside the scope of RoHS. If a RoHS compliant fuse is desired, use a square body fuse with similar performance characteristics.
Back To Top
IEC and British Standard Fuses
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for many of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
CSA Type P & D Fuses
Catalog Symbols:
CDN_, CDS_, PON_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Tron® HRC Form II Class C Fuses
Catalog Symbols:
CGL-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
HRCI Industrial Ceramic Body Fuses
Catalog Symbols:
_CIF06, _CIF21
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
HRCI-J Fast Acting Fuses
Catalog Symbols:
_CJ
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
HRCI-Miscellaneous Type K Fuses
Catalog Symbols:
_CIH07, _CIK07, _CIL14
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
HRC Form II Current-Limiting Fuses
Catalog Symbols:
_H07C, _K07C, _L09C, _L14C, _M09C, _M14C, _P09C, _P11C, _R11C
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
BS88 Low Voltage Fuses
Catalog Symbols:
AAO, AC, AD, BAO, BC, BD, CD, CEO, DD, DEO, ED, EF, EFS, ESD, FF, FG, GF, GG, GH, NITD, NSD, OSD, SSD, STD
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
DIN Type D & Neozed Fuses
Catalog Symbols:
_D16, _D27, _D33, _D125, _NZ01, _NZ02
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
NH HRC Fuses
Catalog Symbols:
_NHG__B
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
NH Low Voltage Fuses
Catalog Symbols:
NH_G-690, NH_M_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Class gG/gL IEC Fuses
Catalog Symbols:
C08G_, C10G_, C14G_, C22G_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Class aM IEC Fuses
Catalog Symbols:
C08M_, C10M_, C14M_, C22M_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
CAMaster BS88 Fuse Holders
Catalog Symbols:
CM_CF, CM_F
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
SAFEloc BS88 Fuse Holders
Catalog Symbols:
32NNSF, 32NNSFBS, 63ENSF, 63ENSBS, 63ENSFBS, C_BS, C_F, C_FBS
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
HRC Distribution Fuse Holders and Fusebanks
Catalog Symbols:
_CB_SN, _CB_TN, _FB_CM, _FB_CMC, _FB_ENS, _FB_NNS, _SB_SN, _SB_TN
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Back To Top
Fuse Holders and Blocks
In general, these products do not use materials containing the substances banned in the RoHS Directive. Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for some of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Fuse Holders (Finger-Safe 3-Pole Switched and Unswitched)
Catalog Symbols:
OPM-1038_, OPM-NG-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Modular Fuse Holders (Finger-Safe 1-, 2-, 3- and 4-Pole)
Catalog Symbols:
CH _ _J_, CHCC_, CHM_, CH08_, CH14_, CH22_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Click here for updated RoHS status of CH Series Global Modular Fuse Holders
Finger-Safe Class J Fuse Holder (1-Pole)
Catalog Symbols:
JT600_, JTN600_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Finger-Safe Fuse Covers (Indicating and Non-indicating)
Catalog Symbols:
SAMI-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
250V & 6000V UL Class H (K) and R Fuse Blocks (1-, 2- and 3-Pole)
Catalog Symbols:
H25_, H60_, R25_, R60_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
UL Class J Fuse Blocks (1-, 2- and 3-Pole)
Catalog Symbols:
J600_, JP60030-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
300V & 600V UL Class T Fuse Blocks (1- to 4-Pole)
Catalog Symbols:
T300_, T600_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Modular Add-A-Pole Fuse Blocks (1-, 2-, 3-Pole With Adder Block)
Catalog Symbols:
BCA603_, BCJ603_, BCM603_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
600V UL Class CC Fuse Blocks (1-, 2- and 3-Pole)
Catalog Symbols:
BC603_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
600V UL 13/32" X 1-1/2" Midget Fuse Blocks (1-, 2- and 3-Pole)
Catalog Symbols:
BM603_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
600V UL Class G Fuse Blocks (1-, 2- and 3-Pole)
Catalog Symbols:
BG30_, G300_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Modular Fuse Blocks
Catalog Symbols:
BH-, 112___-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Box Cover Units For Plug Fuses (Up To 152V/15A)
Catalog Symbols:
SCY, SKA, SOU, SOW, SOX, SOY-, SRU, SRW, SRX, SRY, SSU, SSW, SSX, SSY-, STY
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
In-Line Fuse Holders For 1/4" X 7/8" to 1-1/4" and 5 X 15mm to 20mm Fuses
Catalog Symbols:
HFB-, HHB, HRK
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Tron® In-Line Fuse Holders
Catalog Symbols:
HEB-, HEC-, HEG-, HEH-, HEJ-, HET-, HEX-, HEY-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Panel Mount Fuse Holders For 5 X 20MM and 1/4" X 1" to 1-1/4" Fuses
Catalog Symbols:
HJL, HK_, HKP-, HLD-, HTB, HTC-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Panel Mount Fuse Holders For 13/32" X 1 5/16" to 1-1/2" Fuses
Catalog Symbols:
HPC-D, HPD-, HPF-, HPG-, HPM-, HPS-, HPS2
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Fuse Blocks For 1/4" X 1" to 1-1/4" Fuses
Catalog Symbols:
2499, 3828-, 4393, 4405, 4406, 4520, 4575, S-8___-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Fuse Blocks For 13/32" X 1-1/2" Fuses (1-Pole)
Catalog Symbols:
3743, 3835-, 4421, 4515
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Rail Mount Fuse Holders For 13/32" X 1-1/2" and 1/4" X 1-1/4"Fuses
Catalog Symbols:
NDNF1-, NDNLFD1
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Back To Top
Power Distribution Blocks
In general, these products do not use materials containing the substances banned in the RoHS Directive. Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for some of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
PDB Series High SCCR Power Distribution Blocks
Catalog Symbols:
PDB204-, PDB220-, PDB280-, PDB321-, PDB323-, PDB370-, PDB371-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Power Distribution Blocks
Catalog Symbols:
11675-, 11725-, 160_, 162_, 163_, 165_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Power Stud & Splicer Terminal Blocks (1-, 2-, 3- and 4-Pole)
Catalog Symbols:
160_, 162_, 163_, 165_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Barrier Terminal Blocks (2- to 6-Pole)
Catalog Symbols:
14002-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Dead Front Terminal Blocks (2- to 12-Pole)
Catalog Symbols:
14004-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Back To Top
Wire Connection Products
In general, these products do not use materials containing the substances banned in the RoHS Directive. Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for some of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Rail Mount Terminal Blocks
Catalog Symbols:
N512-, NC3-, NDN_, NFT2-, NFT3-, NSE3-, NSS3-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Rail Mount Disconnect Terminal Blocks
Catalog Symbols:
15188_, 15288_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Sectional Terminal Blocks
Catalog Symbols:
KT4-, KY3-, PLK3-, PLU1-, PLU3-, PSU1-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Quick Connect Terminal Blocks
Catalog Symbols:
BNQ21-, BQQ41-, NTQ23-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Double Row Terminal Blocks (Up To 36 Poles)
Catalog Symbols:
KU_, TB100_, TB200_, TB200HB_, TB300_, TB345_, TB400_, TS_
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Back To Top
Disconnects
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for some of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Fused Disconnect Switches
Catalog Symbols:
SM363_
RoHS Status
Fuse holders, switches and enclosure are RoHS compliant. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Fused Lighting and Appliance Panelboard
Catalog Symbols:
EP_M230_
RoHS Status
Panel, busway and fuse holders are RoHS compliant. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Elevator Disconnect
Catalog Symbols:
PMP_, PS_
RoHS Status
Panel, busway and fuse holders and other components are RoHS compliant. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Fusible Disconnect Switches (2- to 6-Pole)
Catalog Symbols:
CFD_, EF_, FD_
RoHS Status
Switches with fuse holders are RoHS compliant. Fuses are being converted for RoHS compliance. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Non-Fusible Disconnect Switches (2- to 6-Pole)
Catalog Symbols:
BDNF_, CDNF_, ENF_
RoHS Status
Switches are RoHS compliant. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
A/C Disconnects (Fused and Non-Fused Up To 240V/60A)
Catalog Symbols:
B22_
RoHS Status
Disconnects with and without fuse holders are RoHS compliant. Fuses are being converted for RoHS compliance. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Fused Dead Front Disconnect Switches (2- to 3-Pole)
Catalog Symbols:
15149-
RoHS Status
Switches and fuse holders are RoHS compliant. Fuses are being converted for RoHS compliance. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Back To Top
Telecom Protection Products
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for some of these products. The application of Telpower products is typically for network infrastructure equipment for switching, signaling, transmission as well as network management of telecommunications. While Cooper Bussmann is working to eliminate lead solder from the constructions of Telpower products, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because:
- The RoHS Directive allows lead solder as an exemption until 2010 under Item 7 of its annex.
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Fused Disconnect Switches (Up To 145Vdc/800A)
Catalog Symbols:
15100-, 15200-, 15800-, TP158HC, TP15900-4, TP15914, TPA-, TPA-B-, TPC- & TPCDS-, TPHCS_, TPL-, TPM- & TPMDS-, TPN-, TPS-
RoHS Status
Disconnect Switches are RoHS compliant. Fuse compliance varies by fuse. Fuses with lead are exempt from RoHS until 2010 per RoHS Directive ANNEX, ... Article 4(1), Item 7 "- lead in solders for network infrastructure equipment for switching, signaling [sic], transmission as well as network management for telecommunication,...."
Indicating Fuses & Holders (Up To 300Vdc/15A)
Catalog Symbols:
15087, 70_-, 72_, GKB-, GMT-, HLS_, HLT_
RoHS Status
Fuse holders are RoHS compliant. Fuse compliance varies by fuse. Fuses with lead are exempt from RoHS until 2010 per RoHS Directive ANNEX, ... Article 4(1), Item 7 "- lead in solders for network infrastructure equipment for switching, signaling [sic], transmission as well as network management for telecommunication,...."
Specialty Fuses (Up To 440Vdc/20A)
Catalog Symbols:
11C-, 24_-, 74_-, 75_, 76_, 7A-, 7T-, 80_-, 81_-, WER-
RoHS Status
Fuse compliance varies by fuse. Fuses with lead are exempt from RoHS until 2010 per RoHS Directive ANNEX, ... Article 4(1), Item 7 "- lead in solders for network infrastructure equipment for switching, signaling [sic], transmission as well as network management for telecommunication,...."
Filtered Terminal Blocks (Up To 300Vdc/115A)
Catalog Symbols:
F38, F7036, FE2475
RoHS Status
Filtered terminal blocks are RoHS compliant. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in fixed installations.
Power Feed Thru Blocks (Up To 600V/115A)
Catalog Symbols:
C7021-, C7024-
RoHS Status
Power feed thru blocks are RoHS compliant. The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in fixed installations.
Back To Top
Surge Suppression Devices
Cooper Bussmann is actively pursuing eliminating the hazardous substances specified in the RoHS Directive for some of these products. However, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Transient Voltage Surge Suppressors
Catalog Symbols:
TVS
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in fixed installations.
Transient Surge Suppression Limiters
Catalog Symbols:
TVSS-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in fixed installations.
Back To Top
Electronic Components
Printed Circuit Board Level Fuses
These products are generally RoHS compliant because they are intended for use in electronic devices that may fall under the WEEE Directive and the RoHS ban on hazardous substances. Check the status of individual catalog numbers for specific RoHS compliance status. Catalog numbers with a "-R" suffix are RoHS compliant.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Surface Mount Fuses
Catalog Symbols:
0603FA_, 1025FA_, 1025TD_, 3216FF_, 3216LV_, 3216TD_, 6125FA_, 6125TD_, PB50F_, PC04F_, PC06F_, TCP_
RoHS Status
RoHS compliant. Catalog numbers with a "-R" suffix are RoHS compliant with the exception of 6125FA, PB50F, PC04F and PC06F Series which have always been RoHS Compliant without the "-R" suffix.
Axial and Radial Leaded Fuses
Catalog Symbols:
MCRS_, MCRW_, PCB-, PCC-, PCD-, PCE-, PCF-, PCG-, PCH-, PCI-, SR-5-
RoHS Status
RoHS compliant. Catalog numbers with a "-R" suffix are RoHS compliant. Except for MCRW and MCRS which have always been ROHS compliant without the "-R" suffix.
Traditional Ferrule Fuses
Catalog Symbols:
ABC-, AGA-, AGC-, AGX-, C515-, C517-, C518-, C519-, C520-, GBB-, GDA-, GDB-, GDC-, GMA-, GMC-, GMD-, MDA-, MDL-, MDQ-, S500-, S501-, S504-, S505-, S506-, TDC10-, TDC11-
RoHS Status
AGA-, AGX-, GDA-, GDB-, GDC, and S504- are RoHS compliant. MDQ- is not RoHS Compliant. Catalog numbers with a "-R" suffix are RoHS compliant.
Automotive Fuses
Catalog Symbols:
ATC-, ATM-, MAX-
RoHS Status
Fuseclips
Catalog Symbols:
1A1119-, 1A1120-, 1A1907-, 1A3398-, 1A4533-, 1A4534-, 1A5018-, 1A5601, 1A5602, HTC-,
RoHS Status
Fuse Holders
Catalog Symbols:
HBH-, HBV-, HBW-, HFA-, HFB, HHB, HHC, HHD-, HHF, HHG, HHL-, HHM-, HHX-, HKP-, HRK, HTB-X_, HTC-
RoHS Status
Fuse Blocks
Catalog Symbols:
HTC-, S8000, S8100, S8200, S8300
RoHS Status
Only HTC- is RoHS Compliant
Back To Top
Coiltronics® Magnetic Products
These products are generally RoHS compliant because they are intended for use in electronic devices that may fall under the WEEE Directive and the RoHS ban on hazardous substances. Check the status of individual catalog numbers for specific RoHS compliance status. Catalog numbers with a "-R" suffix are RoHS compliant.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
RoHS Transition Readiness
Coiltronics® Compliance Notice and Roadmap
Coiltronics® Magnetics
Click the catalog symbol in the table below for RoHS status
UNI-PAC™
Catalog Symbols:
UP0.4C-, UP0.4SC-, UP0.4UC-, UP1B-, UP2-, UP2.8B-, UP2B-, UP2C-, UP2SC-, UP2T-, UP2UC, UP3B-, UP3T, UP4B-, UP4T, UP5-, UP5S-
RoHS Status
LD Series
Catalog Symbols:
LD1-, LD2-
RoHS Status
CD Series
Catalog Symbols:
CD1-
RoHS Status
DR Series
Catalog Symbols:
DR1030-, DR1050-, DR124-, DR125-, DR127-, DR73-, DR74-, DRQ125-, DRQ127-, DRQ73-, DRQ74-
RoHS Status
LDS0705 Series
Catalog Symbols:
LDS0705-
RoHS Status
SD Series
Catalog Symbols:
SD10-, SD12-, SD14-, SD18-, SD20-, SD25-, SD3110-, SD3112-, SD3114-, SD3118-, SD3812-, SD3814-, SD52-, SD8328-, SDH3812-, SDQ12-, SDQ25-
RoHS Status
MICRO-PAC™
Catalog Symbols:
MP2-
RoHS Status
MICRO-PAC PLUS™
Catalog Symbols:
MP2A-
RoHS Status
ECONO-PAC™/OCTA-PAC®, OCTA-PAC® PLUS
Catalog Symbols:
CTX_-, CTX0_-
RoHS Status
FLAT-PAC™
Catalog Symbols:
FP2-
RoHS Status
FLAT-PAC™ 3
Catalog Symbols:
FP3-
RoHS Status
FLAT-PAC™ 4
Catalog Symbols:
FP4-
RoHS Status
HC HIGH CURRENT Series
Catalog Symbols:
HC1-, HC2-, HC2LP-, HC3-, HC7-, HC8-, HC8LP-, HC9-, HCF1305-, HCP0703-, HCP1104-, HCP1305-, HCPT1309-
RoHS Status
Versa-Pac®
Catalog Symbols:
VP1-, VP2-, VP3-, VP4-, VP5-, VPH1-, VPH2-, VPH3-, VPH4-, VPH5-
RoHS Status
Power Over Ethernet (PoE)/PD
Catalog Symbols:
PoE13W_x__, PoE26W_, PoE4W_x_, PoE7W_x_
RoHS Status
CCFL Transformers
Catalog Symbols:
CTX110_, CTX210_, CTX310_, CTX410_
RoHS Status
Magnetic Components - Standard Geometries
Catalog Symbols:
SG1, SG2, SG3, SG4, SG5, SG6, SG7, SG8, SG9
RoHS Status
CMS-Series
Catalog Symbols:
CMS1-, CMS2-, CMS3-
RoHS Status
CMT-Series
Catalog Symbols:
CMT1-, CMT2-, CMT3-, CMT4-
RoHS Status
CS Series
Catalog Symbols:
CS-
RoHS Status
Toroidal Low-Cost Power Inductors
Catalog Symbols:
CTX10-_-, CTX100-_-, CTX1000-_-, CTX150-_-, CTX20-_-, CTX250-_-, CTX50-_-, CTX500-_-, CTX750-_-,
RoHS Status
Thin-Pac™
Catalog Symbols:
TP1-, TP2-, TP3-, TP4-
RoHS Status
CTX32 Series
Catalog Symbols:
CTX32_
RoHS Status
Back To Top
PolySURG™ Overvoltage Protection Devices
These products are generally RoHS compliant because they are intended for use in electronic devices that may fall under the WEEE Directive and the RoHS ban on hazardous substances. Check the status of individual catalog numbers for specific RoHS compliance status.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
MLP Series Single Line ESD Suppressors
Catalog Symbols:
0402ESDA-MLP_, 0402ESDB-MLP_, 0603ESDA-MLP_
RoHS Status
0603ESDA Single Line ESD Suppressors
Catalog Symbols:
0603ESDA-TR1
RoHS Status
41206ESDA Four Element Array Chip ESD Suppressor
Catalog Symbols:
41206ESDA-TR1
RoHS Status
Back To Top
PowerStor® Supercapacitors
These products are generally RoHS compliant because they are intended for use in electronic devices that may fall under the WEEE Directive and the RoHS ban on hazardous substances. Check the status of individual catalog numbers for specific RoHS compliance status.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
A Series Supercapacitors
Catalog Symbols:
A0820-2R5474, A1020-2R5105, A1030-2R5155, A1635-2R5475
RoHS Status
Catalog numbers with a "-R" suffix are RoHS compliant.
B Series Supercapacitors
Catalog Symbols:
B0510-2R5224, B0810-2R5105, B0820-2R5225, B0830-2R5475, B1010-2R5155, B1020-2R5335, B1030-2R5685, B1325-2R5106, B1635-2R5226, B1835-2R5336, B1840-2R5506, B1860-2R5107
RoHS Status
Catalog numbers with a "-R" suffix are RoHS compliant.
F Series Supercapacitors
Catalog Symbols:
FC-_R_
RoHS Status
Catalog numbers with a "-R" suffix are RoHS compliant.
P Series Supercapacitors
Catalog Symbols:
PA-5R0H_, PA-5R0V_, PB-5R0H_, PB-5R0V_
RoHS Status
Catalog numbers with a "-R" suffix are RoHS compliant.
PAA Series Supercapacitors
Catalog Symbols:
PAA-5R0H_, PAA-5R0V_
RoHS Status
Catalog numbers with a "-R" suffix are RoHS compliant.
PBA Series Supercapacitors
Catalog Symbols:
PBA-5R0H_, PBA-5R0V_
RoHS Status
Catalog numbers with a "-R" suffix are RoHS compliant.
Back To Top
Magnum Terminal and Power Distribution Blocks, and Interconnect Devices
Terminal Blocks
These products are generally RoHS compliant. Additionally, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Single Row Terminal Blocks
Catalog Symbols:
A1_, A2_, A3_, A38_, A4_, A5_, B38_, B4_, CB1_, CB2_, CB3_, CB5_, LP2_, LP3_
RoHS Status
Filtered Terminal Blocks
Catalog Symbols:
F38_, F7036_, FE2475_
RoHS Status
Double Row Terminal Blocks
Catalog Symbols:
TB100-, TB200-, TB200HB-, TB300-, TB345-, TB400-
RoHS Status
Standard, Flat and Raised Base Terminal Blocks
Catalog Symbols:
TS_
RoHS Status
Back To Top
Euro-Mag Series
These products are generally RoHS compliant because they may be used in electronic devices that can fall under the WEEE Directive and the RoHS ban on hazardous substances. Check the status of individual catalog numbers for specific RoHS compliance status.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
PCB Mount Terminal Blocks - Spring Clamp
Catalog Symbols:
EM2661_, EM2665_, EM3123_, EM3127_, EM3660_, EM3661_, EM3665_, EM3671, EM3675_
RoHS Status
PCB Mount Terminal Blocks - Cage Clamp
Catalog Symbols:
EM2205_, EM2505_, EM2506_, EM2507_, EM2585, EM3225_, EM3226_, EM3227_, EM3228_, EM3503_, EM3923_
RoHS Status
PCB Mount Terminal Blocks - Two & Three Tier
Catalog Symbols:
EM2403_, EM2445_, EM2448_, EM2803_, EM2855_
RoHS Status
PCB Mount Terminal Blocks - High Current
Catalog Symbols:
EM2905_, EM2908_, EM2909_, EM2919_, EM2929_, EM2939_, EM3905_, EM3908_, EM9126_, EM9127_, EM9128_
RoHS Status
Screwless Terminal Blocks
Catalog Symbols:
EM2742_, EM2778_, EM2783_, EM2785_, EM2791_, EM2795_, EM2796_, EM2802_, EM2816_
RoHS Status
RoHS Status Query
Pluggable Terminal Blocks
Catalog Symbols:
EM2115_, EM2118_, EM2201_, EM2211_, EM2215_, EM2218_, EM2221_, EM2413_, EM2416_, EM2423_, EM2426_, EM2443_, EM2485_, EM2488_, EM2525_, EM2535_, EM2565_, EM2575_, EM3105_, EM3108_, EM3115_, EM3118_, EM3516_, EM3526_, EM3533_, EM3543_, EM3553_, EM3583_, EM3593_, EM5015_, EM5025_, EM5035_, EM5045_
RoHS Status
Back To Top
Rail Mount Blocks
These products are generally RoHS compliant. Additionally, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Rail Mount Terminal Blocks & Accessories
Catalog Symbols:
N512, NC3, NDN1, NDN111, NDN3, NDN63, NDNV4, NFT2, NFT3, NSE3, NSS3
RoHS Status
Depluggable Rail Mount Terminal Blocks
Catalog Symbols:
PLU1_, PLU3, PSU1_
RoHS Status
Rail Mount Fuse Holders
Catalog Symbols:
NDFD1, NDND1, NDNF1, NDNLFD1
RoHS Status
Back To Top
Terminal Blocks
These products are generally RoHS compliant. Additionally, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Quick Connect Terminal Blocks
Catalog Symbols:
BNQ21, BQQ41, NTQ23
RoHS Status
Base Mount Terminal Blocks
Catalog Symbols:
KT3, KT4, PLK3
RoHS Status
Rail Mount Disconnect Terminal Blocks
Catalog Symbols:
15188-, 15288_
RoHS Status
Base Mount, Double Row Terminal Blocks
Catalog Symbols:
KU_, KUH_, KURL_, KUSC_, KUX_, KUXRL_, KUXSC_
RoHS Status
Quick Connect Power Distribution Blocks
Catalog Symbols:
11675-, 11725-
RoHS Status
Barrier Terminal Blocks
Catalog Symbols:
14002-
RoHS Status
Dead Front Terminal Blocks
Catalog Symbols:
14004-
RoHS Status
Splicer Terminal Blocks
Catalog Symbols:
160_, 162_, 163_, 165_
RoHS Status
PDB Series High SCCR Power Distribution Blocks
Catalog Symbols:
PDB204-, PDB220-, PDB280-, PDB321-, PDB323-, PDB370-, PDB371-
RoHS Status
The majority of applications where these Cooper Bussmann products are used are NOT within the scope of the RoHS and WEEE Directives. These products are mainly used in large-scale, stationary equipment or fixed installations.
Power Distribution Blocks
Catalog Symbols:
160_, 162_, 163_, 165_
RoHS Status
Connector/Stud Power Distribution Blocks
Catalog Symbols:
162_, 163_, 165_
RoHS Status
Power Blocks
Catalog Symbols:
EN61, EN62, EN63
RoHS Status
Back To Top
Wire Management Products
These products are generally RoHS compliant. Additionally, these products, as a group, are exempt from the WEEE and RoHS Directives and do not affect current inventories because they are:
- Not generally used in finished consumer products shipped to the European Union countries where the WEEE and RoHS Directives are in effect.
- NOT within the scope of the RoHS and WEEE Directives per WEEE, Category 6, Annex IB: "Machines or systems consisting of a combination of equipment, systems, finished products and/or components, each of which is designed to be used in industry only, permanently fixed and installed by professional at a given place in an industrial machinery or in an industrial building to perform a specific task. Not intended to be placed on the market as a single functional unit."
- Spare parts according to RoHS, Article 2, Scope (3) "This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006." Further, the Orgalime Guide, Section 3.7 on Spare Parts; " Unless they are within the scope in their own right, spare parts, even if sold directly to the end user, are not within the scope of the WEEE Directive." This position is further supported in the RoHS Frequently Asked Questions section 1.8.
The exceptions to the above are the Series 15133 Depluggable PCB mount terminal blocks, and the 1384X and 15104 Series of edge connectors. These can be used in products falling under the WEEE Directive and they ARE RoHS compliant.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
Photo Control Receptacle Series
Catalog Symbols:
13661-
RoHS Status
Stud-Type Junction Blocks
Catalog Symbols:
C1925_, C1933_, C1938_, C2791_, C2909_, C4044_, C4559-, C5237-, C6083-, C6344_, C7018, C7020, JB1032-, JB3816-
RoHS Status
Power Feed-Thru Terminal Blocks
Catalog Symbols:
C7021-, C7024-
RoHS Status
Pluggable PCB Mount Terminal Blocks
Catalog Symbols:
15133-
RoHS Status
Back To Top
Edge Connectors
These products are generally RoHS compliant because they may be used in electronic devices that can fall under the WEEE Directive and the RoHS ban on hazardous substances. Check the status of individual catalog numbers for specific RoHS compliance status.
Click here for full information on the WEEE and RoHS Directives, and other relevant documents pertaining to the restriction of hazardous substances.
Click the catalog symbol in the table below for RoHS status
One Sided Boards/Vertical Mount
Catalog Symbols:
1384_
RoHS Status
One Sided Boards/Right Angle Mount
Catalog Symbols:
15104-
RoHS Status
Back To Top
